Download

Version 5.1.3.28

• Fixed: A problem if an OPAL encrypted system crashes for any reason, the software would report it is no longer encrypted on next reboot
• Fixed: A problem with HP Elitebook failing to boot with "Unable to locate operating system boot file" error
• Fixed: Endpoint Encryption deployment icon disappearing from the Windows 11 system tray
• Fixed: A problem where the pre-boot authentication screen would freeze when a 2nd monitor is connected or disconnected
• Fixed: A problem where RME encryption fails with an SD card when connected to a SCSI bus
• Fixed: Various localisation fitment issues Improvement: A failed activation no longer closes the activation window
• Fixed: Security vulnerability CVE-2022-2402 [CVSS 6.5] - reported externally
• Fixed: Workaround for a bug in some Lenovo UEFI implementations, that incorrectly report parameters of NVMe drives. This prevented affected systems from booting, when encrypted using TPM with NVMe drives.

Version 5.1.2.27

• Fixed: A problem if an OPAL encrypted system crashes for any reason, the software would report it is no longer encrypted on next reboot
• Fixed: A problem with HP EliteBook failing to boot with "Unable to located" operating system boot file error
• Fixed: Endpoint Encryption deployment icon disappearing from the Windows 11 system tray
• Fixed: A problem where the pre-boot authentication screen would freeze when a 2nd monitor is connected or disconnected
• Fixed: A problem where RME encryption fails with an SD card when connected to a SCSI bus
• Fixed: Various localization fitment issues
• Improvement: A failed activation no longer closes the activation window
• Fixed: Security vulnerability CVE-2022-2402 [CVSS 6.5] - reported externally

Version 5.1.1.14

• Improved: Installing EEE on Windows 7 and Server 2012 R2 now only requires the SHA-2 code signing update KB4474419
• Fixed: Installing EEE on supported Windows Server operating systems was blocked

Version 5.1.0.9

• Added: Starting with this release. Installing EEE on Windows 7 requires the SHA-2 code signing updates KB4474419 & KB4490628.
• Improvement: Added support for encrypting exFAT formatted removable drives
• Improvement: Added the ability to format Removable Media Encrypted drives
• Improvement: Various localization changes
• Improvement: Added English (Indian) keyboard layout
• Fix: A problem when attempting to format an NTFS encrypted removable drive which caused it to become unusable
• Fix: Ability to encrypt superfloppy formatted USB's
• Fix: Now correctly reports touchscreen compatibility to the EEE Server
• Fix: A problem where a Full Disk Encrypted system could fail to boot with "Unable to locate operating system boot file" error

Version 5.0.8.4.

• Fixed: A problem where TPMs could not be initialized during encryption, on a fresh install of Windows 10 20H2 (not upgrade), Already encrypted systems were not affected.
• Fixed: A problem where TPMs could not be initialized during encryption, on Windows 10 deployed using the Microsoft Deployment Toolkit or some other deployment tools.
• Fixed: A problem where some software encrypted workstations occasionally fail to start or resume from sleep, with a power_state_failure error.
• Fixed: Improved TPM initialization on boot.
• Fixed: Improved support for disk names.
• Fixed: Improved the error message should a communication error occur during an update check.

Version 5.0.7.3

• Fixed: Starting Full Disk Encryption on Windows 10 2004 systems with Legacy BIOS
• Fixed: Starting OPAL encryption on Toshiba THNSFJ256GCSU drives
• Improved: Added Hebrew keyboard layout for pre-boot

Version 5.0.6.5

• Fixed: EEE can now be installed on Windows XP
• Fixed: SSO now works on a system using OPAL+TPM encryption
• Fixed: Resolved issues where some systems would crash when entering or coming out of sleep whilst OPAL encrypted
• Fixed: Resolved an issue where some drives would display error "0xC00B004F" after being re-encrypted with OPAL
• Fixed: The show password icon in the bootloader is now functional
• Fixed: Fixed an issue where systems would crash when the system starts FDE - As seen with ADATA - SP920SS drives
• Improved: Support for firmware TPMs improved
• Improved: Will check OPAL decryption can take place before attempting decryption

Version 5.0.5.7

• Changed: Windows XP and 2003 Server is no longer supported.
• Added: EEE now supports the ability to disable pre-boot authentication via the EEE Server.
• Improved: When starting encryption with OPAL the user is blocked from restarting until the OPAL setup process is complete.
• Fixed: Resolved a problem where certain implementations of UEFI BIOS firmware on a laptop could cause the keyboard to not respond in the pre-boot screen.
• Fixed: Single Sign-On (SSO) now works correctly when used with OPAL.
• Fixed: Installation no longer mistakenly blocks when Apache is installed.
• Fixed: Installation is blocked if ESET Endpoint Encryption Server is installed.
• Fixed: Installation is blocked if ESET Full Disk Encryption is installed.
• Fixed: Outlook add-in is now not shown if disabled by policy.
• Fixed: Resolved issues with EEE Go and large files.

Version 5.0.4.0

• Added: Windows 1909 update compatibility
• Fixed: Surface Go issues with use of keyboard during pre-boot authentication

Version 5.0.3.0

• Added: Support of Windows 10 1903 (May 2019) feature update

Version 5.0.1.0

• Fixed a problem where Full Disk Encrypted workstations, which have an OPAL disk(s) that have been partially setup by other software, would be misidentified as using our OPAL encryption.
• Fixed a problem where Single Sign-On would fail and FDE Login commands from the server could not be processed, due to case sensitivity issues when verifying against the user.
• When using a TPM pre-boot authentication keyboards would be not be added
• Installation failed to block when installed on the same machine as an EEE Server.
• Improved meta data validation to prevent rare cases of unbootable systems following recovery and re-encryption
• Updater. Improved error handling when cancelling and/or validating downloads.
• (Managed client only) New: A new package with managed uninstall set is no longer required to upgrade a managed client which already has managed uninstall set
• EEE Go now rebranded in all languages.

Version 5.0.0.0

• Added: Full Disk Encryption now supports OPAL self-encrypting drives (SED) (Managed client only)
• Changed: Rebranded software to ESET Endpoint Encryption Server
• Improved: Updated the legacy (MBR) Full Disk Encryption bootloader to work around a problem caused by HitmanPro and any 3rd party tools that silently block writing to the MBR. These tools could cause a Full Disk Encrypted system to no longer boot after upgrading ESET Endpoint Encryption.
• Improved: The new Maintenance Mode previously introduced in DESlock+ v4.9.2 is now supported on legacy, non-UEFI, machines. (Enterprise Client only)
• Improved: Updated self-heal process performed after a Windows 10 feature update.
• Improved: Outlook Add-in no longer shows as failed to load when blocked by policy. It now shows as loaded, but does not add UI elements to Outlook. (Enterprise Client only)
• Improved: Command-line tool (dlpcmd) has new commands to retrieve Workstation ID and maintenance mode status. Added support for legacy maintenance mode and several minor bug fixes.
• Fixed: SSO would not update if a password was changed twice or more times in the same session.
• Fixed: There was problem during activation when the system default keyboard had a long name. (Managed client only)
• Fixed: ESET Endpoint Encryption Go could experience a performance dip when copying multiple files on Windows 10.
• Fixed: Fixed a problem with Outlook Add-in registration. The x86 add-in would not be registered on x64 Windows if installed before Outlook. (This only occurred with DESlock+ v4.9.4)
• Fixed: Outlook Add-in would crash if a signature containing an image was used and the mail format was set to RTF.
• Fixed: In some rare cases when using Mobile Device Compatilbity Mode the Outlook Add-in could crash when sending an e-mail to an exchange mail group.